Advanced Kit for Arduino
Whether you are a beginner or already have experience with Arduino under your belt,
Building some creative and simple projects is a great way to walk through coding and basic electronic circuits knowledge.
This kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take you from a beginner to an enthusiast. It includes all of the basics: an UNO board, breadboard, cables, LEDs, resistors, and pushbutton switches.
Great for robot prototyping: Includes Servo motor, Ultrasonic sensor, Relay, LCD module and etc. Useful component kits: RFID kit, water sensor for an auto-planting project.
Features :
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming
- Variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured
- UNO Specs:
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Input Voltage (limit): 6-20V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- PWM Digital I/O Pins: 6
- DC Current per I/O Pin: DC Current per I/O Pin: 40 mA; DC Current for 3.3V Pin: 50 mA
- Clock Speed: 16 MHz
- EEPROM: 1 KB (ATmega328)
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
- PWM Output Pins: 6
- SRAM: 2 KB (ATmega328)
- Power Supply Option: DC Jack or USB
- On Board LEDs: Yes
- Operating Temperature (°C): -40 to +90
- Dimensions in mm (LxWxH): 75 x 54 x 12
- Weight (gm): 26
Package Includes :
Boards:
1 x Arduino UNO Development Board.
1 x MB102 830 point Solderless prototype Breadboard (White Color) with DST to stick.
1 x UNO Proto Shield Expansion Board with SYB-170 mini Breadboard.
1 x (6 x AA) battery Holder with 5mm DC male Plug for 9V DC output.
Motors and Motor Driver:
1 x Tower Pro SG-90 9g Micro Servo Motor.
1 x 5V operated 28BYJ-48 Stepper Motor.
1x 5V Stepper Motor Driver Module.
1 x FF270PA Small DC Motor.
Displays:
1 x 1602A LCD Display (Blue).
1 x 4-Digit Seven Segment Display.
1 x 1-Digit Seven Segment Display.
1 x (8 x 8 Dots) Red LED Dot Matrix Display (L x W x H: 32 x 32 x 8 mm).
Sensors:
1 x Liquid Level Sensor Module.
1 x Ambient Light (Photo) Sensor Module.
1 x GY-521 MPU6050 3-Axis Gyroscope and Accelerometer IMU.
1 x HC-SR-04 Ultrasonic Sensor.
1 x Active Buzzer Element.
1 x Passive Buzzer Element.
1 x ASAIR DHT11 Humidity Sensor.
1 x LDR (Light Dependent Resistor) (Photoresistor).
Integrated Circuit (ICs):
1 x MAX 7219CNG (+1816) (Datasheet).
1 x SN74HC 595 (Datasheet).
Buttons and Keypads:
10 x Big Push Buttons (12 x 12 mm).
5 x Small Push button (6 x 6 mm).
1 x Dual Axis XY (PS2) JoyStick Module.
1 x (4×4)Membrane keypad.
LEDs (Light Emitting Diode):
1 x (4-lead) RGB Led.
10 x F5 LED- Red colour.
10 x F5 LED- Green Colour.
6 x F5 LED-While Colour.
10 x F5 LED- Yellow Colour.
Wires and Cables:
1 x 65Pcs. Bundle of Variable Size flexible Breadboard Jumper Wires (Male to Male pin).
1 x Female to Female 20cm Multicolor 10 Dupont Lines Strip.
1x Universal USB to USB type D Cable (Color: Blue, Length: 50cm ) for Arduino board.
Potentiometers and Resistors:
1 x 10K Potentiometer with Adjustable Knob.
1 x 5K Potentiometer with Adjustable Knob.
5 x 1K Resistance.
5 x 10K Resistance.
8 x 220R Resistance.
Other Modules and Accessories:
1 x Tri-color SMD Module.
1 x RFID Card Reader Module.
1 x RFID tag (Key-chain).
1 x RFID White Card (Debit/Credit Card Size ).
1 x IR Remote Control.
1 x IR Receiver LED.
1 x IR Receiver Head.
1 x SRD 05V DC-SL-C Relay.