ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board

ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board

The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.

It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode.

The board has the following new features:

• 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due which operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
• Stronger RESET circuit.

The Mega Arduino R3 Android Accessory Development Kit (ADK) can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm centre-positive plug into the board’s power jack.

Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board.

Package Includes :

1 x Mega R3 Android Accessory Development Kit (ADK) board.

Due to the nature of hobby, we DO NOT provide any kind of warranty/guarantee/OR WILL NOT TAKE BACK any kind of products sold at www.havochobby.com /.in (HAVOC HOBBY).

Although we assure you all of the products are maintained through a strict QC from manufacturer itself. If you have any technical query after your purchase, you can directly call us or WhatsApp us on (+91) 9535545654. We will try our best to solve the query for the same.

Frequent questions on Return Policy:

QUE:- My product is completely working but of no use to me will HAVOC HOBBY accept return?

ANS:-  Due to the nature of hobby, we DO NOT provide any kind of warranty/guarantee/OR WILL NOT TAKE BACK any kind of products sold at www.havochobby.com /.in (HAVOC HOBBY).

QUE:I have purchased one product  through courier and during transit, it got damaged. Will HAVOC HOBBY accept return?

ANS:- Please note that Havoc Hobby Center has a different section to do professional strong packing. The team will send the images and videos of the products and packing prior to the dispatch. Any damage during the transit will be the responsibility of the customer as we dont have control on any courier service. If customer has any difference of opinion in this matter shall be arranged their own pick up service

QUE:- I have purchased one product which is sealed , since I purchased wrongly I need to exchange the product

ANS:- HAVOC HOBBY CENTER  may not exchange / accept return the item once sold.

• As a matter of facts almost all the products have return restrictions as it cannot be sold to another customer since its related to electronics, We urge customers to select products properly while ordering. If for some reason we do provide a Refund it will be in form of Coupon Codes only for next purchase.
• If the customer needs to know more about the product before the purchase, please call our help line number 080-22482248 (10.30AM -6.30PM) MON to SAT.