Skip to content
***** OFFER.***** 10% -15% DISCOUNT on selected products & minimum purchase amount Rs.2500.00. (USE CODE: ONLINESpecial10 ) BALSA 15% Discount (Minimum Qty purchase:10 pc ). ***** Special payment gateway for International customers. For any query please feel free to contact on +91-9535545654
We are accepting ALL ORDERS || Due to COVID-19 Pandemic there might be delay in Delivery of orders than usual

E FLITE 60AMP PRO SWITCH MODEL BEC BRUSHLESS ESC(V2)

Rs. 20,632.00

60-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3

Key Features

  • Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)
  • 5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9 to 18-cell Ni-MH/Ni-Cd input voltage
  • Finned heat sinks
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms-1.9ms or 1.2ms-1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
  • Utilizes new smaller MOSFET technology to minimize weight
  • Radio system power on/off switch
  • Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

Product Specifications

Brakes

Yes - Programmable

Amperage

40-60

Input Voltage

10.8V - 22.2V

Maximum Burst Current

15 sec @ 75A

Connector Type

EC3

Wire Gauge

13 AWG

Programmable

Yes

Output Connector

3.5mm Bullet