Futaba Telemetry System Airspeed Sensor EBB1176 SBS 01TAS E TOP

Futaba SBS-01TAS Airspeed Sensor For Rc Airplane Remote Control Planes Rc Fixed-Wing Drone / Helicopter Drone Accessories

Description:
SBS-01TAS designed for use in Futaba telemetry system.
Purpose: Airspeed sensor(from air pressure)
Range: approximately 15km/h -600 kmh(9mph -373 mph)
length: 195mm[ 7. 68inch]
Weight: 16 g[ 0.56 Oz] (with leather and silicone tubes)
Voltage: DC 3.7 V-DC 7.4 V

The slot number initially set by the SBS-01TAS is "16". This sensor uses a slot. If you need to change the slot number allocation, please refer to your transmitter manual.

Installation Method:
1. S.BUS2 connecting the SBS-01TAS sensor to the receiver
Port. ;
2. SBS. -O1TAS is installed inside the aircraft, away from the turbulence of the wind
And vibrate. Install sensor assembly using double sided tape or equivalent material.
3. Face the horizontal mounting of the model. Pinto must be put The tube is installed in a place that is not affected by the propeller flow and is safely installed in a position facing the front and horizontally.

The top of the skin must be placed at least 15 mm from the leading edge of the wing. Always check for blockages in the skin hosting.

4. Use the supplied silicone tube to handle the SBS-OI1TAS sensor component
Connected to the picket. According to the actual situation of the aircraft, the silicone tube is cut to a suitable length. Ensure that the silicone tube is not bent and that any bending does not affect the flow import.

Operation check:
1. Connect the sensor unit as shown in the figure.
2. Remove the leather cover and develop the transmitter and receiver. After the receiver is connected to the power, the air pressure sensor on the SBS-01TAS will be immediately Initialized, so the LED indicator is red. After the air pressure sensor is Initialized, the LED lamp becomes green and the transmitter screen displays 0km/h.
3. During the initialization process, do not let the wind blow to the skin or expose the skin to the wind(at least 2 seconds).
4. The SBS-01TAS sensor will begin to measure the change between the total pressure and the static pressure to show the calculated airspeed. Incorrect readings will be given if the Peri-managed component is moved or exposed to wind or moving air during initialization.
Follow the instructions above _ to ensure accurate readings. In accidental cases, because of different atmospheric conditions, the AirSpeed obtained may not be accurate. In this case, reboot the system power to allow the sensor to reset.

Warning:
Failure to comply with these security measures can cause serious harm to yourself and others.
1. Use SBS-. 01TAS airspeed sensor to be connected to FUTABA has an S.BUS2 port with a telemetry receiver.
2. If connected to the S.BUS port or other channel port, the SBS-O1TAS will not work properly.
3. Make sure that the component is correctly connected to the receiver and incorrectly connected May cause damage to the sensors.
4. Secure sensors on the aircraft using a sponge double-sided adhesive. As with other electronic components, in order to extend the SBS-O1TAS system For the useful life and improve its performance, appropriate preventive and protective measures should be taken.
5. Ensure that the assembly is installed in an insulated fuel, water, and vibration Area.As with other electronic components, in order to extend the BS-01TAS systemFor the useful life and improve its performance, appropriate preventive and protective measures should be taken.
6. To ensure the normal operation of BS-01TAS, please conduct appropriate tests.
7. Please do not fly until the inspection is complete.
8. Allow the SBS-O1TAS cable to be properly relaxed and secure its cable in a suitable position to prevent any damage caused by vibration during flight.
9. Use only the skin hosting and silicone tubes provided in the package.
10. Do not use SBS-01TAS outside the remote control model.

Due to the nature of hobby, we DO NOT provide any kind of warranty/guarantee/OR WILL NOT TAKE BACK any kind of products sold at www.havochobby.com /.in (HAVOC HOBBY).

Although we assure you all of the products are maintained through a strict QC from manufacturer itself. If you have any technical query after your purchase, you can directly call us or WhatsApp us on (+91) 9535545654. We will try our best to solve the query for the same.

Frequent questions on Return Policy:

QUE:- My product is completely working but of no use to me will HAVOC HOBBY accept return?

ANS:-  Due to the nature of hobby, we DO NOT provide any kind of warranty/guarantee/OR WILL NOT TAKE BACK any kind of products sold at www.havochobby.com /.in (HAVOC HOBBY).

QUE:I have purchased one product  through courier and during transit, it got damaged. Will HAVOC HOBBY accept return?

ANS:- Please note that Havoc Hobby Center has a different section to do professional strong packing. The team will send the images and videos of the products and packing prior to the dispatch. Any damage during the transit will be the responsibility of the customer as we dont have control on any courier service. If customer has any difference of opinion in this matter shall be arranged their own pick up service

QUE:- I have purchased one product which is sealed , since I purchased wrongly I need to exchange the product

ANS:- HAVOC HOBBY CENTER  may not exchange / accept return the item once sold.

• As a matter of facts almost all the products have return restrictions as it cannot be sold to another customer since its related to electronics, We urge customers to select products properly while ordering. If for some reason we do provide a Refund it will be in form of Coupon Codes only for next purchase.
• If the customer needs to know more about the product before the purchase, please call our help line number 080-22482248 (10.30AM -6.30PM) MON to SAT.